Electric hospital bed production and testing standards

In recent years, the rapid development of the medical industry and the improvement of medical conditions have brought great protection to the general public's health, at the same time, medical devices are also booming, electric hospital bed is one of medical devices, as a medical device that allows patients to rest and recuperate, its status is also very important, convenience brought by comfortable and scientific design play an important role in the rehabilitation of patients. It belongs to common medical equipment in the hospital, but few people know its production and testing standards, Shandong Mingtai Medical Equipment Group Co., Ltd glad to explain it for you.

1.      Production standard

(1). Material: the complete set of relevant documents should be required for material factory, for ABS and other materials do not advocate use the recycling and processing ABS materials. And the material factory well documented is required.

(2). Electric hospital bed size: as electric hospital bed manufacturer, our hospital bed size are mainly designed according to the census published by the country every few years, such as the average weight and height, manufacturer will adjust hospital bed’s length, width and other specification according to above data. Our products has high load, all parts can be adjusted and stretched to meet the needs of the vast majority of patients.

(3). Production related process: according to the relevant regulations, rigorous process of rust should be done for electric hospital bed’s steel pipe, if the operation is not rigorous, it will seriously reduce the service life of the electric hospital bed.

(4). Spray work: in accordance with relevant provisions, electric hospital bed must be sprayed three times, this is to ensure that the spray surface can be firmly attached to the surface of the electric hospital bed, will not fall off in a short time. Our operating light, hospital bed, operating table and other metal parts are mostly electrostatic spraying and plating process, with fresh and clean appearance.

2.      Testing standard

For manufacturers, the contents of electric hospital bed testing standards are very important, because the relevant country departments have developed very strict testing standards.

As manufacturer, firstly we must know that how many important testing standards does our country has, and strictly execute in accordance with national standards. One more important thing is technical requirements. The reason why many small manufacturers did not pass the test is that their production technology can not achieve the required test results.

Second is hospital bed material test, no matter stainless steel or ABS plastic, it thickness and hardware and software have to meet the national standards. For example, the steel thickness should be at least 12mm, then the steel plate and steel pipe can be used. If the material thickness can not meet this standard, it is difficult to ensure that the quality of the finished product meets the required standard. In particular, many problems occur after it is put into use, which may cause many after-sales problems and decrease in customer experience.