Operating table work system introduction

As the key and important medical equipment in modern medical activities, orthopedic operation table installation and usage attracts much attention. And its working system has important influence on medical activities and is therefore of comparative concern.

Hydraulic system has those features of compact structure, small size, light weight, low noise, smooth control, easy installation and overall layout. Hydraulic system includes fuel tank, check valve, solenoid valve, relief valve, capsule accumulator, pressure gauge, throttle valve and cylinder. Capsule accumulator can be used as a power source for storing pressure oil and releasing energy when needed. According to the pressure gauge to achieve automatic compensation of pressure. The motors are driven independently by their respective drives. The gynecology delivery bed is equipped with a hand controller for performing various motion controls.

Each surgical OT table parameter is controlled by microprocessor. The microprocessor is connected to the hydraulic and motor actuators via a control drive section. Hydraulic and motor actuators are used to complete the various movements, including forward/backward tilt, lateral tilt, height adjustment, longitudinal movement, etc. The use of microprocessor design can simplify the circuit design, greatly reduce the line failure point, and ensure the reliability of the ophthalmology OR table.

Operation table structure and composition

Generally, surgical OT table consists of table frame and other accessories. The table frame includes support section, transmission section and control section.

Gynecology delivery bed support section, transmission section and control section are different according to different electro OR table manufacturer products. Generally the support section mainly includes three parts: table top, column part and base. The table top is composed of a plurality of support plates with different functions, such as head plate, back plate, waist bridge, hip plate and foot plate. The base part generally includes casters and brake locking devices.

Orthopedic operation table transmission section can be divided into three kinds transmission structure according to the transmission principle: hydraulic, mechanical and pneumatic. The hydraulic transmission structure generally includes cylinder, oil pump, solenoid valve, overflow valve, oil pipeline, hydraulic cylinder, etc. Mechanical transmission structures generally include motors, turbines, worm gears, gears, etc. Pneumatic structures generally include self-locking gas springs, etc.

Ophthalmology OR table control section mainly includes control handle (wired or wireless), control panel and foot controller.

Notes on using orthopedic operation table

The orthopedic operation table is an indispensable and important equipment for modern medical institutions to carry out medical activities. For the use of the device is more important, As electro or table manufacturer, Mingtai will introduce you to the main usage precautions.

1. Press the power switch on the controller panel to enter the operation preparation phase.

2. Correct start and release of the base brake.

3. Prevent accidental injury:

(1). Prevent dumping: Unlocking and fixing the gynecology delivery bed after the base brake is turned on. At this time, operating the operating table or transferring the patient may cause the operation bed to shift and cause the patient to fall out of bed. Therefore, be sure to lock the operating table after completing the adjustment operation.

(2) Prevent pinching or crushing: Do not put your feet under the base when releasing the base brake.

(3). Prevent tripping: Put the wire in place to avoid tripping when walking.

(4). Prevent electric shock: Do not operate or repair the surgical OT table when the appliance access cover or control components are removed.

(5). Prevent burns: When using an electric knife, prevent the patient's skin from touching the metal part of the operating table and avoid burning.

4. The controller should be hung on the rails on the side of the ophthalmology OR table. The line should avoid pinching and crushing to prevent line damage.

5. Do not place heavy objects on the power cord or push the cart over the power cord.

How to ensure the performance of the surgical OT table

The installation and use of the surgical OT table is more concerned and valued by the majority of medical institutions. In the daily use process, it is also crucial and important to ensure the operating performance of the orthopedic operation table. Now Shandong Mingtai company glad to introduce it to you.

1. Cleaning and disinfection surgical beds and accessories:

(1). Clean the ophthalmology OR table and accessories with a weak glass cleaner containing surfactants and phosphate gum

(2). Sterilization of the operating bed should be diluted and disinfected with a surface disinfectant containing ethyl acetate. The mixture containing ecstasy should not be used to avoid corrosion of the metal surface.

(3). Do not spray or rinse the base with detergent and clean water to prevent internal electrical control systems from shorting out, parts from rusting or malfunctioning.

2. Do not operate the hydraulic motor continuously for more than 5 minutes to avoid malfunction.

3. Do a good job in accessories management. When not in use, orderly place them on dedicated racks and check them regularly to prevent loss and damage.

4. Master the correct use of the gynecology delivery bed and the use and installation of different accessories.

5. Check the function of the electric operating table regularly. The maintenance work is done by professionals to ensure the need for surgery.